EchoTherm™ HP30 and HS30 Digital Hot Plates and Hot Plate/Stirrers.

Features:
* Extremely easy use by anyone in your lab
* Platinum RTD temperature measurement for precision and accuracy
* Solid ceramic heater top for quick heating on a flat, white, chemically resistant surface. Milled flat cast aluminum top available
* Cast aluminum framed ceramic heater top edges stay cooler to prevent burns
* PID temperature control for exact, tight sample control of plate or solution
* Timer goes up to 99 hours, 59 minutes, 59 seconds with settable Auto-Off for exactly timed sample preparation
* Electronic calibration stored in chip. No batteries to replace
* Temperature ramping for exact heating and cooling rates
* Strong motor and magnet for stirring most samples
* Full-featured digital display for checking all parameters instantly
* High and neutral lines fused for safety
* UL, CSA and CE certified

Product Description:

The EchoTherm HP30 and HS30 are designed to be the easiest to use and most accurate fully featured hot plates and stirring hot plates in the world. Temperature measurement of a solution is accurate to 1% over the entire temperature range using a 100 ohm platinum RTD sensor and measurement system.

Calibration of temperature is electronic and stored in memory. The calibration is set at the factory but can be done easily in the field using the probe calibration kit accessory.

The chassis on both models is cast aluminum designed to keep spills and heat out of the electronics. They are coated with chemically resistant epoxy based paint for durability.

Product Specification:
Hot Plate:
Dimensions 8” (20.3 cm) x 8” (20.3 cm)
Maximum temperature of the plate surface ceramic top: 450°C; cast aluminum top: 400°C
Temperature control type PID
Temperature accuracy 1%
Temperature regulation, solution or plate ±1°C
Heater power in watts 600 W
Temperature Measurement:
Platinum RTD 100 ohm, in plate and in probe
Range ceramic top: 0-450°C; aluminum top: 0-400°C
Readability 1°C
Stirrer:
Speed range unloaded 100–1500 rpm
Readability 10 rpm
Settability nearest 10 rpm

Electrical:
Power : 230 VAC, 50/60 Hz