STIRRING HOTPLATE 200 x 200 mm MODEL HS 10-2.
HOTPLATE STIRRER WITH CERAMIC TOP PLATED,
MODEL HS 10-2,
Made in Torrey Pines Scientific - USA
Analog Stirring or Hot Plates
Heat, stir, or heat and stir on a rugged, quick heating, flat, white, solid ceramic heater surface.
Heat up to 450° C
Stir from 100 to 1500 RPM for Magnetic Stirrer ST 10-2
Plate size on the HS10 is: 20.32 x 20.32 cm
Solid ceramic heater surface for excellent chemical resistance
Heater plate mounted in cast aluminum frame that remains cool for safety
Efficient 600-watt heaters on the HS10
Fused for safety
Rugged cast aluminum chassis
Each Torrey Pines Scientific hot plate is made with a cast aluminim chassis that is painted with chemically resistant epoxy paint.
The chassis is designed to keep spills out of the case. Heating and stirring controls are solid state with individual indicator lights which illuminate when either is activated.
The controls are well forward of the heater surface to prevent accidental burns.
Additionally, the solid ceramic heater plate is framed in cast aluminum and is designed to keep heat from the edge of the heater plate. .
The stirrer features a solid state control capable of stirring an aqueous solution from 100 to 1500 rpm.
The control has an Off position fully counter-clockwise, and is continuous over 270 degrees of rotation from minimum to maximum speed when turned on.
The magnet is a circular disc with twenty pound pull strength and is capable of stirring more than two liters of aqueous solution.
The heater control has Off, Lo, and High positions for quick setting, and a smooth infinite control of about 270 degrees between LO and HIGH settings.
The control will regulate a set point to ± 2.5° C.
Control knobs are specially selected to provide easy use and positive, tactile feel.
All units are fused, and have a 3-foot long detachable AC line cord with a male plug that matches the local standard.
MODEL HS 10-2,
Made in Torrey Pines Scientific - USA
Analog Stirring or Hot Plates
Heat, stir, or heat and stir on a rugged, quick heating, flat, white, solid ceramic heater surface.
Heat up to 450° C
Stir from 100 to 1500 RPM for Magnetic Stirrer ST 10-2
Plate size on the HS10 is: 20.32 x 20.32 cm
Solid ceramic heater surface for excellent chemical resistance
Heater plate mounted in cast aluminum frame that remains cool for safety
Efficient 600-watt heaters on the HS10
Fused for safety
Rugged cast aluminum chassis
Each Torrey Pines Scientific hot plate is made with a cast aluminim chassis that is painted with chemically resistant epoxy paint.
The chassis is designed to keep spills out of the case. Heating and stirring controls are solid state with individual indicator lights which illuminate when either is activated.
The controls are well forward of the heater surface to prevent accidental burns.
Additionally, the solid ceramic heater plate is framed in cast aluminum and is designed to keep heat from the edge of the heater plate. .
The stirrer features a solid state control capable of stirring an aqueous solution from 100 to 1500 rpm.
The control has an Off position fully counter-clockwise, and is continuous over 270 degrees of rotation from minimum to maximum speed when turned on.
The magnet is a circular disc with twenty pound pull strength and is capable of stirring more than two liters of aqueous solution.
The heater control has Off, Lo, and High positions for quick setting, and a smooth infinite control of about 270 degrees between LO and HIGH settings.
The control will regulate a set point to ± 2.5° C.
Control knobs are specially selected to provide easy use and positive, tactile feel.
All units are fused, and have a 3-foot long detachable AC line cord with a male plug that matches the local standard.
