F48010-33 BENCHTOP MUFFLE FURNACE 5.8L 1200°C
Made in Thermo Scientific - USA

F48010 Benchtop Muffle Furnace with A1 Digital Single Setpoint Temperature Controller, temp: 100° to 1200°C, 5.8 Litre (0.2 cubic foot) capacity, 240V

Thermolyne benchtop muffle furnace has a capacity of 5.8L (0.2cu ft),
requires 240V, and is for use with general laboratory, including gravimetric
analysis, sintering, quantitative analysis and heat treating.

Reaches a 1200°C maximum temperature.
The built-in vent port removes contaminants and moisture to extend the life of the heating element and furnace.
Digital single setpoint control.
Single display shows actual temperature or setpoint.
For added protection, the door safety switch stops power to heating elements
when door opens.
Thermocouple break protection cuts power to heating elements, preventing a thermocouple failure runaway condition.
Two open coil heating elements on chamber sides assure fast heat-up
with minimum temperature gradient.
Thermal-efficient ceramic insulation surrounds chamber for maximum energy efficiency. 0.95cm (0.38in) dia. port for monitoring chamber temperatures with independent measuring device at rear of chamber. Includes power cord.

Specifications :
Temperature Range 100 to 1200°C (212 to 2192°F).
Display Digital, actual or setpoint.
Capacity 5.8L (0.2cu ft).
Interior Dimensions 10 x 7 x 5-Inch. (D x W x H)
Exterior Dimensions 19.5 x 13.3 x 19in. (L x W x H)
Control A1 - Digital Single Setpoint.
Voltage Rating 240V.
Frequency 50/60Hz.
Power Rating 1560W.
Certifications CE Marked.