SOUND LEVEL METER WITH DATA LOGGING INTEGRATING/LEQ
MODEL CEL-246 .

The CEL246 is a data logging integrating sound level meter that meets the
international standards to Type 2 / Class 2, as required by many noise measurement standards. It measures and stores the Lavg and Leq along with the Fast or
Slow sound level and comes with both A and C frequency weightings.

USA regulations (OSHA) occupational noise surveys - Lavg
Canadian, European and other noise at work regulations - Leq
Logs the sound level every 1 second
Lightweight but rugged case
Calibration certificate included

Standards

ANSI S1.4, ANSI S1.43 Type 2
IEC 60651 and IEC 60804 Type 2
IEC 61672 Class 2

Integrating - Averaging Sound Level Meter

A standard (non integrating) sound level meter gives an instantaneous reading of the sound level. In an environment where the sound levels are changing continuously, as most are, it can be very difficult to average this by eye. The solution is to use an Integrating sound level meter such as the CEL246, which will give you a reading of
Lavg or Leq, depending on which regulations are being followed.

Due to the risk of underestimating the average sound level, especially if you fail to
take into account the logarithmic nature of the decibel, many regulations advise or
even demand the use of an Integrating Sound Level Meter.

Technical Specification :

Measurement ranges 30 to 100 and 60 to 130 dB
Storage Over 4 days of time history at 1s
Noise floor < 33dB(A)
Max 18 hours/ measurement
Time weightings Fast, Slow, Impulse
TIme History Rate From 1s to 10s programmable
Freq. weightings A and C
Average Parameters Leq and Lavg
Battery power 3 x AA Alkaline for >35 hours
5V via USB Mini B socket
Dimensions 72 x 212 x 31mm, 245g
Tripod mount 1/4" socket Operating conditions
RH: 5 to 90% (non condensing)
Temperature: 0 to 40°C
AC output 0.85V RMS @ FSD "A" weighted
Atmos. pressure 65 to 108kPa